200 AMP Alternator Kit

For anyone performing a Bullitt Mustang Intake Manifold Conversion

This is a very popular replacement where significantly increased capacity is needed.  In order to use the Bullitt Intake Manifold on a 4.6L not originally equipped with it (1999 to current), we specifically assembled this kit to put a 4G alternator back on a 4.6L Mustang which originally was equipped with a 6G 

#4 Gauge Power Wire Kit is Required !

The 4G is about 30% thinner and is rated at 130 amps - and required for the added clearance when using the longer intake manifold as on the Bullitt cars. 
The original 6G alternator is only rated at 105 amps 

OEM style adapter plug needed for this conversion is included.  Using this adapter ELIMINATES all wiring modifications.  Plug and play!  If you ever want to convert back to the 6G Alternator, just unplug it (also sold separately)
100+ amps at idle (2000 alternator shaft rpm)
200+ amps maximum (6000 alternator shaft rpm)
The stock belt can be used on original equipment vehicles
Actual Alternator Weight is 15.2 lbs
 

All units are 100% NEW and come complete with internal voltage regulator and pulley